Make sure this part fits

Oldsmobile 84594588 HORN KIT,GENERIC (HIGH NOTE)

1982-2004 Oldsmobile

Customer Questions & Expert Answers (32)
GM 84594588 HORN KIT,GENERIC (HIGH NOTE)
  • Part Description
    HORN KIT,GENERIC (HIGH NOTE)
  • Replaces
    01999286, 01892241, 01999217, 01999713, 01999070, 10344818, 10456328, 10372337, 10402065, 10456323, 02029365, 15172410, 15072100, 15043346, 15146059, 19301083, 15018063, 15144581, 01999262, 1999162, 89046919, 01999141, 01999192, 01999162, 25695574, 10414428, 10456329, 12368061, 15017322, 15299672, 15248350, 10456444, 15045821, 15220753, 15014989, 1892241, 1999262, 1999280, 1999713, 1999070, 1892246, 2029365, 1999192, 1999286, 12368063, 89046917, 15013185, 15017321, 1999217, 1999141, 84614013
  • Manufacturer
    General Motors
Make sure this part fits
$49.18 MSRP: $72.55
You Save: $23.37 (33%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Oldsmobile
    Manufacturer Part Number84594588
    Part DescriptionHORN KIT,GENERIC (HIGH NOTE)
    Other NamesHigh Note Horn, Horn
    Item Dimensions6.6 x 4.5 x 4.3 inches
    Item Weight1.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces01999286, 01892241, 01999217, 01999713, 01999070, 10344818, 10456328, 10372337, 10402065, 10456323, 02029365, 15172410, 15072100, 15043346, 15146059, 19301083, 15018063, 15144581, 01999262, 1999162, 89046919, 01999141, 01999192, 01999162, 25695574, 10414428, 10456329, 12368061, 15017322, 15299672, 15248350, 10456444, 15045821, 15220753, 15014989, 1892241, 1999262, 1999280, 1999713, 1999070, 1892246, 2029365, 1999192, 1999286, 12368063, 89046917, 15013185, 15017321, 1999217, 1999141, 84614013
    ManufacturerGeneral Motors
    SKU84594588
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1992-1999 Oldsmobile 886 Cyl 3.8L4 DOOR, 50TH ANNIVERSARY 4 DOOR, LSS 4 DOOR, ROYALE 4 DOOR, ROYALE LS, ROYALE LS 4 DOOR, ROYALE LSS 4 DOOR
    1991-1996 Oldsmobile 986 Cyl 3.8LREGENCY 4 DOOR, REGENCY ELITE, TOURING SEDAN
    1992-1998 Oldsmobile Achieva4 Cyl 2.3L, 4 Cyl 2.4L, 6 Cyl 3.1L, 6 Cyl 3.3L2 DOOR, 4 DOOR, S 2 DOOR, S 4 DOOR, SC 2 DOOR, SEDAN LEVEL I, SEDAN LEVEL II, SL 2 DOOR, SL 4 DOOR
    1999-2004 Oldsmobile Alero4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.4L2 DOOR, 4 DOOR, GL COUPE 2 DOOR, GL SEDAN 4 DOOR, GX 2 DOOR, GX SEDAN 4 DOOR, LEVEL I 2 DOOR, LEVEL I 4 DOOR, LEVEL II COUPE 2 DOOR, LEVEL II SEDAN 4 DOOR
    1995-1999 Oldsmobile Aurora8 Cyl 4.0L4 DOOR, AURORA
    2002-2004, 1996-1998, 1993-1994 Oldsmobile Bravada6 Cyl 4.2L, 6 Cyl 4.3L4 DOOR, BRAVADA
    1985-1991 Oldsmobile Calais4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 3.3L2 DOOR, 4 DOOR, INTERNATIONAL 2 DOOR, INTERNATIONAL 4 DOOR, S 2 DOOR, S 4 DOOR, SL 2 DOOR, SL 4 DOOR, SUPREME 2 DOOR, SUPREME 4 DOOR
    1987-1992 Oldsmobile Custom Cruiser8 Cyl 5.0L, 8 Cyl 5.7LSTATION WAGON
    1982-1999 Oldsmobile Cutlass4 Cyl 2.2L, 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.0L, 6 Cyl 3.1L, 6 Cyl 3.3L, 6 Cyl 3.4L, 6 Cyl 3.8L, 6 Cyl 4.3L Diesel, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 2 DOOR NOTCHBACK, BROUGHAM 4 DOOR, BROUGHAM SL 2 DOOR, BROUGHAM STATION WAGON, CUTLASS CALAIS, CUTLASS CRUISER, INTERNAL 2 DOOR, INTERNAL 4 DOOR, LS 2 DOOR, LS 2 DOOR NOTCHBACK, LS 4 DOOR, LS STATION WAGON, S 2 DOOR, S 4 DOOR, S STATION WAGON, SEDAN LEVEL I, SEDAN LEVEL II, SL 2 DOOR, SL 4 DOOR, SL STATION WAGON, STATION WAGON
    1982-1988 Oldsmobile Firenza4 Cyl 1.8L, 4 Cyl 2.0L, 6 Cyl 2.8L2 DOOR, 2 DOOR NOTCHBACK, 2 DOOR PLAIN BACK HATCHBACK, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 2 DOOR NOTCHBACK, BROUGHAM 2 DOOR PLAIN BACK, BROUGHAM 4 DOOR, BROUGHAM STATION WAGON, STATION WAGON
    View More
  • Customer Questions & Expert Answers

    Q:
    Do these parts fit my vehicle? Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 84594588 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What is the first thing to check if the horn is not working on Buick Skylark? Posted by Customer
    A:
    To troubleshoot a car horn, check the fuse first. If it's intact, use a jumper wire to connect a 12-volt source to the wiring terminal on the horn. If it sounds, it's likely a problem with the circuit before the horn. If it does not blow, the problem may be with the grounding of the horn or the horn itself. Other possible issues include bent metal contacts on the actuator or faulty wires. When replacing the relay, be careful not to short the threaded stud to the ground as it could damage the vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How to remove and install a horn on GMC Sierra? Posted by Customer
    A:
    on Chevy truck models, remove the headlight housing and disconnect the electrical connector. Next, remove the horn mounting bracket bolt and remove the horn and bracket. Detach the horn from its mounting bracket. Installation is the reverse of removal.
    Posted by GMPartsGiant Specialist
    Q:
    How to remove and install a horn on Chevrolet Silverado? Posted by Customer
    A:
    You need to start by taking off the headlight housing from these SUVs and Chevy trucks. Start by unplugging the horn, then loosen and remove the bolt holding the mounting bracket. Pull out the horn unit along with its mounting hardware. Last, free the horn from its fixture point. Set up the horn by doing the pieces in the opposite order you removed them.
    Posted by GMPartsGiant Specialist
    Q:
    What is the first thing to check if the horn is not working on Pontiac Phoenix? Posted by Customer
    A:
    To troubleshoot a car horn, check the fuse first. If it's intact, use a jumper wire to connect a 12-volt source to the wiring terminal on the horn. If it sounds, it's likely a problem with the circuit before the horn. If it does not blow, the problem may be with the grounding of the horn or the horn itself. Other possible issues include bent metal contacts on the actuator or faulty wires. When replacing the relay, be careful not to short the threaded stud to the ground as it could damage the vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the inner fender splash shield of the 2012 Buick Enclave? Posted by Customer
    A:
    Start by locating the horns on each side of the vehicle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    What should you do after detaching the battery vent hose of the 2007 Buick Rainier? Posted by Customer
    A:
    Disconnect the electrical connector.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    What should you do if there's voltage at the horn connector but the horn doesn't work for the 2003 Cadillac DeVille? Posted by Customer
    A:
    If there's voltage at the horn connector, check for a bad ground at the horn. A poor ground can prevent the horn from functioning properly.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    How can I ensure proper drainage for the horn for the 1993 Cadillac Fleetwood? Posted by Customer
    A:
    If the horn has a single opening, adjust it downward to allow for adequate drainage and prevent debris accumulation.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    What should I do if no voltage is present at the horn electrical connector for the 1997 Chevrolet Astro? Posted by Customer
    A:
    Check the circuit and wires for obvious damage or a short.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    What should be done to the horn after removing the protective panel for the 1990 Chevrolet Beretta? Posted by Customer
    A:
    Take out the horn mounting bracket bolt, lower the horn, unplug the electrical connector, and remove the horn.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    What needs to be removed in order to remove the horn on a GMC truck for the 2009 Chevrolet Avalanche? Posted by Customer
    A:
    The fasteners securing the front of the inner fender liner must be removed, followed by the bumper cover trim panel from below the headlight.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    Where is the horn assembly located for the 1998 Chevrolet Blazer? Posted by Customer
    A:
    The horn assembly is located inside the right fender, next to the battery.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    What should be done if the fuse is in good condition for the 1983 Chevrolet Caprice? Posted by Customer
    A:
    If the fuse is in good condition, disconnect the electrical lead at the horn and run a jumper wire from a 12-volt source to the wiring terminal on the horn.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    What is the procedure for installing the horns for the 1997 Chevrolet Corvette? Posted by Customer
    A:
    To install, follow the reverse order of removal.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    What should be the first step if the horn proves inoperable for the 1987 Chevrolet El Camino? Posted by Customer
    A:
    The first check should be the fuse, which can be readily identified at the fuse box under the lower left side of the dashboard.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    Where are the horns located in the engine compartment for the 2014 Chevrolet Express? Posted by Customer
    A:
    The horns are situated in the left front corner of the engine compartment, behind and below the left headlight.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    How do you remove the horns from the 2006 Chevrolet Impala? Posted by Customer
    A:
    Remove the horn mounting bracket bolt and take out the two horns along with the mounting bracket as a single assembly.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    Can the horns be detached from the mounting bracket for the 2007 Chevrolet Monte Carlo? Posted by Customer
    A:
    Yes, after removing the horns and mounting bracket, you can detach either or both horns from the mounting bracket by unbolting them as needed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    How can the horn be removed for the 1994 Chevrolet S10? Posted by Customer
    A:
    To remove the horn, the electrical connector should be unplugged, the bracket bolt should be removed, and the horn should be lifted from the engine compartment.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    What needs to be removed to access the left horn of the 1996 GMC Jimmy? Posted by Customer
    A:
    To access the left horn, the windshield tank needs to be removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    What needs to be done after removing the fasteners and bumper cover trim panel on a GMC truck for the 2007 Chevrolet Tahoe? Posted by Customer
    A:
    The electrical connector must be disconnected from the horn.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    What needs to be removed in order to remove the horn on an SUV or Chevy truck for the 2009 Chevrolet Suburban? Posted by Customer
    A:
    The headlight housing must be removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    How do you install the inner fender splash shield for the 2010 Chevrolet Traverse? Posted by Customer
    A:
    Simply reverse the steps of removal.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    What is the first thing to check if the horn is not working of the 1982 Oldsmobile Omega? Posted by Customer
    A:
    The first thing to check is the fuse.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    What should you do if the horn still doesn't blow of the 1998 Oldsmobile Cutlass? Posted by Customer
    A:
    If the horn still doesn't blow, the problem may be with the grounding of the horn or the horn itself.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    What needs to be done after removing the fasteners and bumper cover trim panel on a GMC truck of the 2010 GMC Yukon? Posted by Customer
    A:
    The electrical connector must be disconnected from the horn.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    How do you remove the inner fender splash shield for the 2008 GMC Acadia? Posted by Customer
    A:
    Start by locating the horns on each side of the vehicle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    What should you do after detaching the battery vent hose for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Disconnect the electrical connector.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    What should be done if the amperage is over 20 amps for the 1997 GMC Sonoma? Posted by Customer
    A:
    If the amperage is over 20 amps, the horn needs to be replaced.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    How do you complete the installation of the horns for the 2006 Pontiac G6? Posted by Customer
    A:
    To complete the process, installation follows the reverse order of removal.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    Q:
    What should you do for horns mounted at the front of the engine compartment by the hood latch for the 1996 Pontiac Grand Prix? Posted by Customer
    A:
    For horns mounted at the front of the engine compartment by the hood latch, remove the headlight housing panel or the air deflector panel above the hood latch to access the horns.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Horn
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 84594588, the Right Choice

To ensure reliability, purchase GM part # 84594588 HORN KIT,GENERIC (HIGH NOTE). It is sometimes referred to as Oldsmobile Horn. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Oldsmobile Bravada, Custom Cruiser, Cutlass models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 84594588 HORN KIT,GENERIC (HIGH NOTE). You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Oldsmobile parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly