Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

Pontiac 9595178 Bolt,Wheel

1982-2010 Pontiac

Customer Questions & Expert Answers (9)
GM 9595178 Bolt,Wheel
GM 9595178 Bolt,Wheel
GM 9595178 Bolt,Wheel
GM 9595178 Bolt,Wheel
  • Part Description
    STUD,Front and Rear Wheel
  • Manufacturer
    General Motors
Make sure this part fits
$3.45 MSRP: $5.42
You Save: $1.97 (37%)
Ships in 1-2 Business Days
10
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • Related Parts

    Shop for related parts for your vehicle

  • Product Specifications

    BrandGenuine Pontiac
    Manufacturer Part Number9595178
    Part DescriptionSTUD,Front and Rear Wheel
    Item Dimensions4.8 x 4.0 x 3.5 inches
    Item Weight1.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU9595178
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1982-1991 Pontiac 60004 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.1L, 6 Cyl 4.3L Diesel2 DOOR, 4 DOOR, LE 2 DOOR, LE 4 DOOR, LE STATION WAGON, SE 4 DOOR, SE STATION WAGON, STATION WAGON, STE 2 DOOR, STE 4 DOOR
    2001-2005 Pontiac Aztek6 Cyl 3.4LAZTEK, GT AWD
    1982-2005 Pontiac Bonneville6 Cyl 3.8L, 6 Cyl 4.1L, 6 Cyl 4.3L, 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, GXP 4 DOOR, LE 2 DOOR, LE 4 DOOR, SE 4 DOOR, SLE 4 DOOR, SSE, SSE 4 DOOR, SSEI 4 DOOR, STATION WAGON
    1998-2002, 1982-1992 Pontiac Firebird4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.1L, 6 Cyl 3.8L, 8 Cyl 5.0L, 8 Cyl 5.7L2 DOOR, CONVERTIBLE, COUPE
    2007-2010 Pontiac G54 Cyl 2.2L, 4 Cyl 2.4L2 DOOR, 4 DOOR, LS 2 DOOR, LS 4 DOOR, SE 2 DOOR, SE 4 DOOR, SPORT 2 DOOR, SPORT 4 DOOR
    2005-2010 Pontiac G64 Cyl 2.4L, 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.6L, 6 Cyl 3.9LGT 2 DOOR CONVERTIBLE, GT 2 DOOR NOTCHBACK, GT 4 DOOR NOTCHBACK, GTP 2 DOOR CONVERTIBL, GTP 2 DOOR NOTCHBACK, GXP 2 DOOR NOTCHBACK, GXP 4 DOOR NOTCHBACK, SE 4 DOOR NOTCHBACK, SE1 2 DOOR NOTCHBACK, SE1 4 DOOR NOTCHBACK
    1985-2005 Pontiac Grand Am4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.3L, 4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 3.1L, 6 Cyl 3.3L, 6 Cyl 3.4L2 DOOR, 4 DOOR, GT 2 DOOR, GT 2 DOOR COUPE, GT 4 DOOR, GT1 2 DOOR, GT1 2 DOOR COUPE, GT1 4 DOOR, LE 2 DOOR, LE 4 DOOR, SE 2 DOOR, SE 4 DOOR, SE 4 DOOR SEDAN, SE1 2 DOOR, SE1 4 DOOR
    1992-2008, 1982-1987 Pontiac Grand Prix6 Cyl 3.1L, 6 Cyl 3.4L, 6 Cyl 3.8L, 6 Cyl 4.1L, 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.3L, 8 Cyl 5.7L Diesel2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, GT 2 DOOR, GT 4 DOOR, GT2 4 DOOR, GTP 2 DOOR, GTP 4 DOOR, GXP 4 DOOR, LE 2 DOOR, LE 4 DOOR, SE 2 DOOR, SE 4 DOOR, STATION WAGON, STE 4 DOOR
    1985-1986 Pontiac J20004 Cyl 1.8L, 4 Cyl 2.0L2 DOOR, 2 DOOR NOTCHBACK, 2 DOOR PLAINBACK HATCHBACK, 4 DOOR, GT 2 DOOR, GT 4 DOOR, GT CONVERTIBLE, LE 2 DOOR NOTCHBACK, LE 4 DOOR, LE CONVERTIBLE, LE STATION WAGON, SE 2 DOOR, SE 4 DOOR, SE CONVERTIBLE, SE HATCHBACK, STATION WAGON
    1999-2000 Pontiac Montana6 Cyl 3.4L2/SLIDING DOORS, EXT, EXT 2/SLIDING DOORS, MONTANA, SPECIAL 2/SLIDING DOORS
    View More

  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 9595178 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove a stud on Buick Rainier? Posted by Customer
    A:
    To remove a wheel hub bolts from a vehicle, begin by releasing screws holding the wheel and lifting the car with safety jack stands. After raising the car, take off the wheel and then brake rotor. In order to remove wheel hub bolt, use push tool in pressing it out through hub flange. While inserting hub flange from its backside, place new wheel hub bolt; then secure it using flat washers and lug nut on the bolt. Spin lug nut until it is fully seated in flange. After that replace caliper bracket followed by disc; lastly put back wheel as well as its nuts. Lastly, lower your vehicle and tighten all nuts according to their torque specifications of manufacturer.
    Posted by GMPartsGiant Specialist
    Q:
    How do you replace front and rear wheel studs on Chevrolet Beretta? Posted by Customer
    A:
    It is also the same method to be used in the front and rear wheel studs. First it is necessary to take out the hub and wheel bearing assembly. Third, position in a lug nut halfway onto the stud that is being wired. There are variants that, using a press tool, you can feel the stud from the hub flange. Place the new stud into the hub flange from the back side, place four flat washers and a nut on the stud and while tightening to enplace the stud. Finally it is necessary to tighten a lug nut until the stud stays in the flange and put back the hub and wheel bearing assembly.
    Posted by GMPartsGiant Specialist
    Q:
    How do you replace wheel studs on Chevrolet Colorado? Posted by Customer
    A:
    This procedure has to be done on both front and rear shims of the wheel studs. Start with the removing of the wheel lug nuts, lifting of the car and placing it on jackstands before you proceed to remove the wheel. Third, then, take off the brake disc. Those are: With the help of a small press tool, it is possible to push out the stud in the hub flange. Slide the new stud from the rear into the hub flange, add a few flat washers and a lug nut on the stud. Make a final turn on the flange until the stud is well tightened to the lug nut. Last but not the least, replace the disc and caliper, fit the wheel and the nut, and lower the car, also tighten the nuts to the recommended torque.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove a stud on Chevrolet Trailblazer? Posted by Customer
    A:
    To remove a wheel hub bolts from a vehicle, begin by releasing screws holding the wheel and lifting the car with safety jack stands. After raising the car, take off the wheel and then brake rotor. In order to remove wheel hub bolt, use push tool in pressing it out through hub flange. While inserting hub flange from its backside, place new wheel hub bolt; then secure it using flat washers and lug nut on the bolt. Spin lug nut until it is fully seated in flange. After that replace caliper bracket followed by disc; lastly put back wheel as well as its nuts. Lastly, lower your vehicle and tighten all nuts according to their torque specifications of manufacturer.
    Posted by GMPartsGiant Specialist
    Q:
    How do you replace wheel studs on GMC Canyon? Posted by Customer
    A:
    This procedure has to be done on both front and rear shims of the wheel studs. Start with the removing of the wheel lug nuts, lifting of the car and placing it on jackstands before you proceed to remove the wheel. Third, then, take off the brake disc. Those are: With the help of a small press tool, it is possible to push out the stud in the hub flange. Slide the new stud from the rear into the hub flange, add a few flat washers and a lug nut on the stud. Make a final turn on the flange until the stud is well tightened to the lug nut. Last but not the least, replace the disc and caliper, fit the wheel and the nut, and lower the car, also tighten the nuts to the recommended torque.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the brake disc for the 2005 Cadillac DeVille? Posted by Customer
    A:
    Start by removing it from the hub.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub Bolt
    Q:
    What should you do after installing the new stud of the 2009 Cadillac DTS? Posted by Customer
    A:
    Reattach the brake disc and tighten the caliper mounting bolts to the specified torque.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub Bolt
    Q:
    What components are needed to secure the new stud for the 1998 Pontiac Grand Prix? Posted by Customer
    A:
    Install four flat washers along with a lug nut on the stud.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub Bolt
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 9595178, the Right Choice

To ensure reliability, purchase GM part # 9595178 Bolt,Wheel. It is sometimes referred to as Pontiac Wheel Hub Bolt. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Pontiac 6000, G5, Grand Prix models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 9595178 Bolt,Wheel. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Pontiac parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly