Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center

Genuine Saturn Ion Oil Pump

Oil Fluid Pump
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Pumps found

  • Saturn Ion Oil Pump - 24231142
    Saturn Ion Oil Pump - 24231142
    Saturn Ion Oil Pump - 24231142
    View related parts

    Saturn Ion Pump,Automatic Transmission Fluid

    Part Number: 24231142
    Product Specifications
    • Other Name: PUMP, Transmission Oil Pump
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2005-2007 Saturn Ion | 2 DOOR, 4 DOOR, REDLINE 2 DOOR | 4 Cyl 2.2L, 4 Cyl 2.4L
  • Saturn Ion Oil Pump - 24222291
    View related parts

    Saturn Ion Automatic Transmission Fluid Pump Assembly

    Part Number: 24222291
    Product Specifications
    • Other Name: PUMP, Transmission Oil Pump
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2003-2004 Saturn Ion | 2 DOOR, REDLINE 2 DOOR | 4 Cyl 2.0L, 4 Cyl 2.2L

Saturn Ion Oil Pump

Saturn Ion Oil Pump keeps engine internals slick and cool by pushing pressurized lubricant through bearings, pistons and the camshaft. The pump draws oil from the sump through a mesh strainer, forces it through the filter, then sends it along galleries where switches or sending units monitor pressure, lighting a dash warning or moving a gauge if flow drops. Over the years the compact Saturn compact car has relied on crank driven variations, and each Ion generation may use one of three main styles. A direct drive Oil Pump circles the crankshaft itself, its gear fixed to the crank end for simple, strong rotation. Gear drive and chain drive versions place the Oil Pump beside the crank, turning it with a matched gear set or sprocket chain that demands periodic inspection for wear. Some engines adopt a crankcase mounted Oil Pump moved by a driveshaft with hex ends that must stay sharp to prevent slip. In every style the Oil Pump needs precise gear clearance and a free relief valve, and a clean pickup screen keep Saturn and Ion powerplants protected at every RPM.

Each OEM Saturn Ion Oil Pump we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Saturn Ion Oil Pump Parts Questions & Experts Answers

  • Saturn Ion Oil Pump - 24231142 Pump,Automatic Transmission Fluid Pump,Automatic Transmission Fluid
    24231142
    Q: How to replace an oil pump assembly on Saturn ION?
    A:
    Drain the engine oil and remove the drivebelt. Loosen the right-front wheel lug nuts, raise the front of the vehicle and support it securely on jackstands. Remove the right front wheel. Remove the engine front cover. On the front side of the engine cover, remove the four bolts retaining the round gerotor cover from the engine cover. Working on the backside of the engine cover, loosen the oil pump cover screws a little at a time until they're all loose. When all of the screws are loose, remove the cover. Note any identification marks on the rotors and withdraw the rotors from the pump body. If no marks can be seen, use a permanent marker and make your own to ensure that they will be installed correctly. Thoroughly clean and dry the components. Inspect the rotors for obvious wear or damage. If either rotor, the pump body or the cover is scored or damaged, the complete oil pump assembly must be replaced. Also check the inner-to-outer rotor tip clearance, the outer rotor-to-housing clearance, and the rotor-to-cover side clearance. If the oil pump components are in acceptable condition, dip the rotors in clean engine oil and install them into the pump body with any identification marks positioned as noted during disassembly. Remove the oil pressure relief valve components from the front cover. Thoroughly clean and dry the components. Inspect the components for obvious wear or damage. Install them in the correct order. Install the rotors into the housing with the hub of the inner rotor facing the engine front cover. The inner rotor hub must be installed correctly or the engine front cover/gerotor cover will not fasten properly. Install the oil pump cover and screws and tighten by hand until snug. Then tighten the screws gradually and evenly to the torque. Install the oil pressure relief valve components. Install the engine front cover. Fill the engine with fresh engine oil. Install a new oil filter. Start the engine and check for leaks. Run the engine and make sure oil pressure comes up to normal quickly. If it doesn't, stop the engine and find out the cause. Severe engine damage can result from running an engine with insufficient oil pressure!

Related Saturn Ion Parts

Browse by Year

+
2007 Oil Pump 2006 Oil Pump 2005 Oil Pump 2004 Oil Pump 2003 Oil Pump