Make sure this part fits

Chevrolet 14073097 Mount,Engine

1982-1985 Chevrolet

Customer Questions & Expert Answers (14)
GM 14073097 Mount,Engine
  • Part Description
    MOUNT, Engine Mount Dampening
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chevrolet
    Manufacturer Part Number14073097
    Part DescriptionMOUNT, Engine Mount Dampening
    Item Dimensions4.6 x 4.3 x 3.6 inches
    Item Weight2.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU14073097
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1982-1985 Chevrolet Celebrity4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L Diesel2 DOOR, 4 DOOR, STATION WAGON
    1982-1984 Chevrolet Citation4 Cyl 2.5L2 DOOR, 2 DOOR NOTCHBACK, 2 DOOR PLAINBACK HATCHBACK, 4 DOOR
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 14073097 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    When should I replace a mount for the 1984 Buick Skylark? Posted by Customer
    A:
    You should replace any mount with hardened or cracked rubber.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How often should engine mounts be inspected for the 1982 Buick Skylark? Posted by Customer
    A:
    Engine mounts should be periodically inspected.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step in replacing the mounts for the 1984 Pontiac Fiero? Posted by Customer
    A:
    Begin by removing the engine compartment lid and side cover panels without disturbing the torsion rod retaining bolts.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the procedure for replacing the rear mount for the 1983 Oldsmobile Cutlass? Posted by Customer
    A:
    Remove the bolts that go through the mount and into the transmission, then raise the transmission slightly using a jack. Remove the mount along with any shims, spacers, or brackets, and install the new mount. Lower the transmission and align the bolts before tightening all bolts to the specified torque.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step to access the area beneath the car for the 1983 Oldsmobile Cutlass? Posted by Customer
    A:
    Raise the car for access beneath and support it firmly with stands, ensuring the vehicle is secured.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How do you install the new transaxle mount for the 1985 Pontiac Fiero? Posted by Customer
    A:
    Position the new mount and install the mount-to-cradle nuts finger tight. Then, place the transaxle support bracket and install the mount-to-support bracket nut and the bracket-to-transaxle bolts finger tight. Ensure all mounting hardware is loose, lower the jack until the transaxle centers the mount, and then tighten the hardware to the specified torque before reconnecting the negative battery cable.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How do you inspect the front mount for the 1985 Oldsmobile Cutlass? Posted by Customer
    A:
    To inspect the front mount, raise the engine slightly to create tension on the rubber mount using a hoist or jack placed under the forward edge of the oil pan. Check for heat cracks on the hard rubber surface, rubber separating from the metal plate, or splits through the center.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How often should engine mounts be inspected for the 1982 Oldsmobile Omega? Posted by Customer
    A:
    Engine mounts should be periodically inspected.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step in replacing the transaxle mount for the 1988 Pontiac Fiero? Posted by Customer
    A:
    Begin the replacement by disconnecting the negative battery cable and supporting the transaxle with a jack.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How can I check the mounts of the 1982 Oldsmobile Omega? Posted by Customer
    A:
    You can check the mounts by pushing upward and pulling downward on the transaxle case.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How can I access and inspect the mounts for the 1984 Pontiac Phoenix? Posted by Customer
    A:
    To access and inspect the mounts, you need to raise the car and support it with jack stands.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How often should engine mounts be inspected for the 1982 Pontiac Phoenix? Posted by Customer
    A:
    Engine mounts should be periodically inspected.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the process for the engine torque reaction strut for the 1986 Pontiac Fiero? Posted by Customer
    A:
    1. Remove both strut bolts. 2. Install the front strut bolt loosely. 3. Push the engine back to install the rear strut bolt. 4. Tighten both bolts to the specified torque.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Engine Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 14073097, the Right Choice

To ensure reliability, purchase GM part # 14073097 Mount,Engine. It is sometimes referred to as Chevrolet Engine Mount, Chevrolet Motor And Transmission Mount. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Celebrity, Citation models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 14073097 Mount,Engine. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly