Make sure this part fits your vehicle

Oldsmobile 26022717 Switch,Ignition Key Alarm

1982-1999 Oldsmobile

GM 26022717 Switch,Ignition Key Alarm
  • Part Description
    SWITCH, Ignition Switch Warning, Lock, Headlamp,Theft Deterrent or Frt/Rear/Side Object
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Customer Questions & Answers
  • Product Specifications

    BrandGenuine Oldsmobile
    Manufacturer Part Number26022717
    Part DescriptionSWITCH, Ignition Switch Warning, Lock, Headlamp,Theft Deterrent or Frt/Rear/Side Object
    Item Dimensions2.3 x 2.2 x 0.8 inches
    Item Weight0.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU26022717
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1992-1999 Oldsmobile 886 Cyl 3.8L4 DOOR, 50TH ANNIVERSARY 4 DOOR, LSS 4 DOOR, ROYALE 4 DOOR, ROYALE LS, ROYALE LS 4 DOOR, ROYALE LSS 4 DOOR
    1982-1996 Oldsmobile 986 Cyl 3.0L, 6 Cyl 3.8L, 6 Cyl 4.1L, 6 Cyl 4.3L Diesel, 8 Cyl 5.0L, 8 Cyl 5.7L DieselREGENCY 2 DOOR, REGENCY 4 DOOR, REGENCY BROUGH 2 DOOR, REGENCY BROUGH 4 DOOR, REGENCY BROUGHAM, REGENCY ELITE, TOURING SEDAN
    1991-1994 Oldsmobile Bravada6 Cyl 4.3LBRAVADA
    1985-1991 Oldsmobile Calais4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 3.3L2 DOOR, 4 DOOR, INTERNATIONAL 2 DOOR, INTERNATIONAL 4 DOOR, S 2 DOOR, S 4 DOOR, SL 2 DOOR, SL 4 DOOR, SUPREME 2 DOOR, SUPREME 4 DOOR
    1991-1992, 1982-1988 Oldsmobile Custom Cruiser8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 5.7L Diesel2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR, BROUGHAM LS 4 DOOR, RWD, STATION WAGON
    1982-1997 Oldsmobile Cutlass4 Cyl 2.2L, 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.0L, 6 Cyl 3.1L, 6 Cyl 3.3L, 6 Cyl 3.4L, 6 Cyl 3.8L, 6 Cyl 4.3L Diesel, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 2 DOOR NOTCHBACK, BROUGHAM 4 DOOR, BROUGHAM SL 2 DOOR, BROUGHAM STATION WAGON, CUTLASS CALAIS, CUTLASS CRUISER, LS 2 DOOR, LS 2 DOOR NOTCHBACK, LS 4 DOOR, LS STATION WAGON, S 2 DOOR, S 4 DOOR, S STATION WAGON, SL 2 DOOR, SL 4 DOOR, SL STATION WAGON, STATION WAGON
    1982-1991 Oldsmobile Delta 886 Cyl 3.0L, 6 Cyl 3.8L, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR, BROUGHAM LS 4 DOOR, ROYALE 2 DOOR, ROYALE 4 DOOR, ROYALE BROUGHAM 2 DOOR, ROYALE BROUGHAM 4 DOOR, RWD, STATION WAGON
    1982-1988 Oldsmobile Firenza4 Cyl 1.8L, 4 Cyl 2.0L, 6 Cyl 2.8L2 DOOR, 2 DOOR NOTCHBACK, 2 DOOR PLAIN BACK HATCHBACK, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 2 DOOR NOTCHBACK, BROUGHAM 2 DOOR PLAIN BACK, BROUGHAM 4 DOOR, BROUGHAM STATION WAGON, STATION WAGON
    1982-1984 Oldsmobile Omega4 Cyl 2.5L, 6 Cyl 2.8L2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR
    1990-1996 Oldsmobile Silhouette6 Cyl 3.1L, 6 Cyl 3.4L, 6 Cyl 3.8LMPV
    View More

Customer Questions & Answers

Q:
I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
A:
You can Select Your Vehicle to check if 26022717 fits your vehicle.
Posted by GMPartsGiant Specialist
Q:
How do you remove the ignition switch? Posted by Customer
A:
Proceed with removing the ignition switch by disconnecting the two wiring leads, starting with the one farthest from the steering wheel. Remove the stud and screw securing the switch to the column, and lift off the switch, making sure to pull it up from the column due to the protruding ignition actuator rod. Before installing the new switch, use a flat-head screwdriver to move the slider inside the switch to the 'Accessory' position on the extreme right, then slide it two detents to the left to the 'off/unlock' position. This position is necessary for installation. Place the switch on the column, guiding the actuator rod into the slider recess. Install the stud and screw, tightening them to specifications. Finally, connect the two wiring leads to the switch and reverse the procedure.
Posted by GMPartsGiant Specialist
Q:
What should you do before installing the new switch for the 1981 Buick Skylark? Posted by Customer
A:
Before installing the new switch, use a flat-head screwdriver to move the slider inside the switch to the 'Accessory' position on the extreme right, then slide it two detents to the left to the 'off/unlock' position. This position is necessary for installation.
Posted by GMPartsGiant Specialist
See expert answers on similar Ignition Switch
Q:
Where is the ignition switch located for the 2003 Cadillac DeVille? Posted by Customer
A:
The ignition switch is located on the lower portion of the steering column.
Posted by GMPartsGiant Specialist
See expert answers on similar Ignition Switch
Q:
What should be done after removing the SIR fuse and sound insulator for the 1991 Cadillac Fleetwood? Posted by Customer
A:
Next, detach the Connector Position Assurance (CPA) and disconnect the yellow 2-way connector at the base of the steering column.
Posted by GMPartsGiant Specialist
See expert answers on similar Ignition Switch
Q:
How should you approach the removal and installation of the ignition switch on the 1995 Chevrolet C1500? Posted by Customer
A:
To remove and install the ignition switch on 1988 through 1994 models, disconnect the negative battery cable, place the ignition switch in the Lock position, and lower the steering column. Remove the ignition switch retaining screws, lift the switch out, and reconnect the actuating rod before reinstalling it.
Posted by GMPartsGiant Specialist
See expert answers on similar Ignition Switch
Q:
What are the steps to remove the headlight dimmer switch on the 1992 Chevrolet K1500? Posted by Customer
A:
To remove the headlight dimmer switch on 1988 through 1994 models, you should remove the steering column support bracket bolts and nuts, lower the steering column, disconnect the dimmer switch electrical connector, and remove the retaining bolts.
Posted by GMPartsGiant Specialist
See expert answers on similar Ignition Switch
Q:
What should you do before installing the new switch of the 1982 Oldsmobile Omega? Posted by Customer
A:
Before installing the new switch, use a flat-head screwdriver to move the slider inside the switch to the 'Accessory' position on the extreme right, then slide it two detents to the left to the 'off/unlock' position.
Posted by GMPartsGiant Specialist
See expert answers on similar Ignition Switch
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 26022717, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 26022717 Switch,Ignition Key Alarm. It is sometimes referred to as Oldsmobile Ignition Switch. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Oldsmobile Bravada, Custom Cruiser, Cutlass models.

Affordable, reliable and built to last, GM part # 26022717 Switch,Ignition Key Alarm stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Oldsmobile parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly