Make sure this part fits your vehicle

Oldsmobile 3035192 Htr Motor Cooling Tube

1986-2000 Oldsmobile

GM 3035192 Htr Motor Cooling Tube
  • Part Description
    TUBE, A/C Blower Motor Cooling
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Customer Questions & Answers
  • Product Specifications

    BrandGenuine Oldsmobile
    Manufacturer Part Number3035192
    Part DescriptionTUBE, A/C Blower Motor Cooling
    Other NamesBlower Motor Tube, Tube, Vent Tube
    Item Dimensions4.5 x 2.7 x 1.0 inches
    Item Weight0.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU3035192
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1992-1999 Oldsmobile 886 Cyl 3.8L4 DOOR, 50TH ANNIVERSARY 4 DOOR, LSS 4 DOOR, ROYALE 4 DOOR, ROYALE LS, ROYALE LS 4 DOOR, ROYALE LSS 4 DOOR
    1987-1996 Oldsmobile 986 Cyl 3.8LREGENCY 4 DOOR, REGENCY BROUGH 2 DOOR, REGENCY BROUGH 4 DOOR, REGENCY BROUGHAM, REGENCY ELITE, TOURING SEDAN
    1991-1994 Oldsmobile Bravada6 Cyl 4.3LBRAVADA
    1986-1990 Oldsmobile Custom Cruiser8 Cyl 5.0LSTATION WAGON
    1994-1996 Oldsmobile Cutlass4 Cyl 2.2L, 6 Cyl 3.1LS 4 DOOR, S STATION WAGON, SL 4 DOOR, SL STATION WAGON
    1988-1991 Oldsmobile Delta 886 Cyl 3.8LBROUGHAM 2 DOOR, BROUGHAM 4 DOOR, ROYALE 2 DOOR, ROYALE 4 DOOR, ROYALE BROUGHAM 2 DOOR, ROYALE BROUGHAM 4 DOOR
    1998-2000 Oldsmobile Intrigue6 Cyl 3.5L, 6 Cyl 3.8L4 DOOR, GL 4 DOOR, GLS 4 DOOR, GX 4 DOOR
    1992-1999 Oldsmobile Silhouette6 Cyl 3.1L, 6 Cyl 3.4L, 6 Cyl 3.8L2/SLIDING DOORS, EXT, EXT 2/SLIDING DOORS, MPV, SILHOUETTE
    1986-1992 Oldsmobile Toronado6 Cyl 3.8LBROUGHAM, TORONADO, TROFEO

Customer Questions & Answers

Q:
Is it correct part number for my vehicle? Posted by GMPartsGiant Specialist
A:
You can Select Your Vehicle to check if 3035192 fits your vehicle.
Posted by GMPartsGiant Specialist
Q:
How do I remove the A/C Hose? Posted by Customer
A:
To remove the spare tire and access the necessary components, start by disconnecting the cable from the negative terminal of the battery. Then, remove the jack and spare tire, followed by the jack storage bracket. Next, remove the bolts and plastic pop fasteners securing the spare tire storage panel. Use pliers or a screwdriver to lift and remove each fastener. Once the panel is removed, disconnect the outlet tube and hose assembly from the threaded fitting on the top left side of the accumulator. If replacing the inlet tube, disconnect it from the threaded fitting of the condenser inlet pipe. If replacing the outlet tube and hose, remove the bolt and support bracket from the lower rear bulkhead of the front compartment. In the engine compartment, unbolt the compressor hose fitting and disconnect the inlet and outlet hoses. With the vehicle raised and supported on jackstands, remove the catalytic converter heat shield, three support brackets, and the fuel tank reinforcement brace. Finally, remove the inlet or outlet tube. To install the new A/C hose, place it in position and secure it with the fuel tank reinforcement brace, underbody support brackets, and catalytic converter heat shield. Lower the vehicle and install the inlet hose support bracket if replacing the inlet tube and hose assembly. Connect the inlet and outlet lines to the compressor hose fitting, and connect the inlet tube to the accumulator. Finally, set the plastic spare tire panel in place, install the jack support bracket, and secure the jack and spare tire.
Posted by GMPartsGiant Specialist
Q:
How do you install a new hose assembly of the 1986 Pontiac Fiero? Posted by Customer
A:
To install a new hose assembly, you should do the following: 1. Lubricate the O-rings with refrigerant oil. 2. Ensure the correct O-ring is used for each connection. 3. Tighten the bolts at the compressor and hose assembly clamp securely. 4. Install the hose fittings at the inlet and outlet tube assemblies. 5. Tighten the fittings to the specified torque. 6. Finally, have the vehicle air conditioning system recharged by a professional.
Posted by GMPartsGiant Specialist
See expert answers on similar A/C Hose
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 3035192, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 3035192 Htr Motor Cooling Tube. It is sometimes referred to as Oldsmobile A/C Hose. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Oldsmobile Bravada, Custom Cruiser, Cutlass models.

Affordable, reliable and built to last, GM part # 3035192 Htr Motor Cooling Tube stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Oldsmobile parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly