Make sure this part fits

Pontiac 24506309 Engine Exhaust Manifold

1996-2003 Pontiac

Customer Questions & Expert Answers (8)
GM 24506309 Engine Exhaust Manifold
  • Part Description
    Manifold, Exhaust ; Manifold, Engine Exhaust Manifold
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Pontiac
    Manufacturer Part Number24506309
    Part DescriptionManifold, Exhaust ; Manifold, Engine Exhaust Manifold
    Other NamesExhaust Manifold, Manifold
    Item Dimensions19.2 x 6.7 x 4.4 inches
    Item Weight14.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU24506309
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2001-2003 Pontiac Aztek6 Cyl 3.4LAZTEK, GT AWD
    1999-2003 Pontiac Grand Am6 Cyl 3.4LGT 2 DOOR, GT 4 DOOR, GT1 2 DOOR, GT1 4 DOOR, SE 2 DOOR, SE 4 DOOR, SE1 2 DOOR, SE1 4 DOOR
    1997-2003 Pontiac Grand Prix6 Cyl 3.1L2 DOOR, 4 DOOR, GT 2 DOOR, GT 4 DOOR, GTP 2 DOOR, GTP 4 DOOR, SE 4 DOOR
    1999-2003 Pontiac Montana6 Cyl 3.4L2/SLIDING DOORS, AWD EXT 2/SLIDING DOORS, EXT, EXT 2/SLIDING DOORS, MONTANA, SPECIAL 2/SLIDING DOORS
    1996-1998 Pontiac Trans Sport6 Cyl 3.4L2/SLIDING DOORS, EXT, EXT 2/SLIDING DOORS, TRANS SPORT
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 24506309 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What is the next step after handling the spark plug wires for the 1999 Oldsmobile Cutlass? Posted by Customer
    A:
    Disconnect the EFE pipe and remove the exhaust manifold bolts along with the manifold.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What are the next steps after removing the drivebelt and alternator for the 1997 Pontiac Grand Prix? Posted by Customer
    A:
    After that, take off the torque rod, raise the front of the vehicle, and securely support it on jackstands while applying the parking brake and blocking the rear wheels to prevent rolling.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be done before starting the procedure for the 1998 Pontiac Grand Prix? Posted by Customer
    A:
    Allow the engine to cool completely before beginning this procedure.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be done if the engine has been removed from the car for the 1997 Oldsmobile Cutlass? Posted by Customer
    A:
    If the engine has been removed from the car, disregard the following steps which do not apply.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What steps are involved in removing the front exhaust manifold for the 1997 Pontiac Grand Prix? Posted by Customer
    A:
    1. Remove the cooling fan for access. 2. Take out the mass airflow sensor, air duct, and crankcase ventilation pipe if necessary. 3. Remove the engine mount struts and acoustic cover on 1996 and later models. 4. Unbolt the manifold from the crossover pipe. 5. Remove the dipstick tube hold-down nut. 6. Detach the spark plug wires from the front spark plugs. 7. Take off the exhaust manifold heat shield if equipped. 8. Finally, unbolt and remove the exhaust manifold.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be done with the exhaust manifold nuts for the 1999 Pontiac Grand Prix? Posted by Customer
    A:
    Remove the exhaust manifold nuts, support the engine if necessary, lower it to remove the steering gear heat shield, and then take off the exhaust manifold.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    Q:
    What should be done after cleaning the surfaces for the 1998 Pontiac Grand Prix? Posted by Customer
    A:
    Install a new gasket, hand tighten the manifold fasteners, and then tighten the bolts/nuts to the specified torque in the recommended sequence.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Exhaust Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 24506309, the Right Choice

To ensure reliability, purchase GM part # 24506309 Engine Exhaust Manifold. It is sometimes referred to as Pontiac Exhaust Manifold. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Pontiac Aztek, Grand Am, Grand Prix models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 24506309 Engine Exhaust Manifold. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Pontiac parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly