How do you remove and install camshaft sensors in Chevrolet Equinox,GMC Terrain and Pontiac Torrent?

To remove the camshaft position sensor 3.0L and 3.6L V6 engines have four camshaft sensors. If replacing the CMP sensor on the right side, remove the air filter housing. For the left side replacement on 2013 and later 3.6L models, remove the front engine mount. Installation is the reverse of removal. The 2.4L four-cylinder engine has two camshaft sensors, the intake camshaft position sensor located below the fuel pump, and the exhaust camshaft sensor located at the corner of the cylinder head above the exhaust manifold. To remove the intake camshaft position sensor, remove the fuel pump cover, disconnect the electrical connector, and remove the mounting bolt and the sensor from the cylinder head.

Genuine GMC Terrain Camshaft Position Sensor

Cam Position Sensor

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

5 Camshaft Position Sensors found

View related parts
GMC Terrain Sensor Assembly, Camshaft Position
Part Number: 12684186
- Other Name: Sensor Assembly, Cm/Shf Posn; Camshaft Position Sensor, Camshaft Sensor
- Replaces: 12615371
$15.88 MSRP: $32.98
You Save: $17.10 (52%)

Add to Cart
More Info
Fits the following Vehicles:
2010-2017 GMC Terrain | SLE2 SUV, SLT SUV | 6 Cyl 3.0L, 6 Cyl 3.6L
Less Info
View related parts
GMC Terrain Sensor Assembly, Camshaft Position
Part Number: 12674704
- Other Name: Sensor Assembly, Cm/Shf Posn; Camshaft Position Sensor, Camshaft Sensor
- Replaces: 12577245
$42.21 MSRP: $87.64
You Save: $45.43 (52%)

Add to Cart
More Info
Fits the following Vehicles:
2010-2017 GMC Terrain | SLE1 SUV, SLE2 SUV, SLT SUV | 4 Cyl 2.4L
Less Info
View related parts
GMC Terrain Sensor Assembly, Camshaft Position
Part Number: 12638266
- Other Name: SENSOR, Distributor (also Knock Sensor); Camshaft Position Sensor, Camshaft Sensor
$37.44 MSRP: $70.65
You Save: $33.21 (48%)

Add to Cart
More Info
Fits the following Vehicles:
2018-2020 GMC Terrain | 4 DOOR SLE2, 4 DOOR SLT1, 4 DOOR SLT2 | 4 Cyl 2.0L
Less Info
View related parts
GMC Terrain Sensor Assembly, Camshaft Position
Part Number: 55580466
- Other Name: SENSOR, Distributor (also Knock Sensor); Camshaft Position Sensor, Camshaft Sensor
$12.72 MSRP: $24.00
You Save: $11.28 (47%)

Add to Cart
More Info
Fits the following Vehicles:
2018-2019 GMC Terrain | 4 DOOR SLE2, 4 DOOR SLT1 | 4 Cyl 1.6L Diesel
Less Info
View related parts
GMC Terrain Sensor Assembly, Camshaft Position
Part Number: 12636947
- Other Name: SENSOR, Distributor (also Knock Sensor); Camshaft Position Sensor, Camshaft Sensor
$20.51 MSRP: $38.70
You Save: $18.19 (48%)

Add to Cart
More Info
Fits the following Vehicles:
2018-2021 GMC Terrain | 4 DOOR SLE2, 4 DOOR SLT1 | 4 Cyl 1.5L
Less Info

GMC Terrain Camshaft Position Sensor Parts Questions & Answers

Sensor Assembly, Camshaft Position
12674704
Q: How do you remove and install camshaft sensors in Chevrolet Equinox,GMC Terrain and Pontiac Torrent?
A: To remove the camshaft position sensor 3.0L and 3.6L V6 engines have four camshaft sensors. If replacing the CMP sensor on the right side, remove the air filter housing. For the left side replacement on 2013 and later 3.6L models, remove the front engine mount. Installation is the reverse of removal. The 2.4L four-cylinder engine has two camshaft sensors, the intake camshaft position sensor located below the fuel pump, and the exhaust camshaft sensor located at the corner of the cylinder head above the exhaust manifold. To remove the intake camshaft position sensor, remove the fuel pump cover, disconnect the electrical connector, and remove the mounting bolt and the sensor from the cylinder head.