Make sure this part fits

GM 10162077 Cylinder Head Assembly (Machining)

1991-1995 GM

Customer Questions & Expert Answers (8)
GM 10162077 Cylinder Head Assembly (Machining)
  • Part Description
    Head Assembly, Cyl (Machining)
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number10162077
    Part DescriptionHead Assembly, Cyl (Machining)
    Other NamesCylinder Head
    Item Dimensions19.7 x 10.9 x 5.5 inches
    Item Weight18.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerGeneral Motors
    SKU10162077
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1991-1995 Chevrolet Lumina6 Cyl 3.4L2 DOOR, 4 DOOR, LS, LS 4 DOOR, LUMINA, MONTE CARLO
    1995 Chevrolet Monte Carlo6 Cyl 3.4LLS, LS 4 DOOR, LUMINA, MONTE CARLO
    1991-1995 Oldsmobile Cutlass6 Cyl 3.4L2 DOOR, 4 DOOR, INTERNAL 2 DOOR, INTERNAL 4 DOOR
    1991-1995 Pontiac Grand Prix6 Cyl 3.4L2 DOOR, 4 DOOR, GT 2 DOOR, LE 2 DOOR, LE 4 DOOR, SE 2 DOOR, SE 4 DOOR, STE 4 DOOR
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 10162077 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How should the new gaskets be positioned for the 1992 Pontiac Grand Prix? Posted by Customer
    A:
    Position new gaskets over the dowel pins, applying adhesive if necessary, and carefully place the heads on the block without disturbing the gaskets.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What should be verified if the head was sent out for service work for the 1993 Pontiac Grand Prix? Posted by Customer
    A:
    The installed height should be correct, but it is important to verify this measurement from the top of each spring seat, rotator, or top shim to the bottom of the retainer.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    How should the valves be removed for the 1992 Oldsmobile Cutlass? Posted by Customer
    A:
    Finally, remove each valve in turn and place them in the numbered box or rack to complete the valve mechanism removal, ensuring that the valve components are kept in an area where they will not be mixed up.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What is the procedure for lifting the cylinder head off the engine for the 1992 Pontiac Grand Prix? Posted by Customer
    A:
    Lift the head off the engine carefully, using a hammer and block of wood if necessary, and remove the cylinder head gasket.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What specific step is required for the 1994 Pontiac Grand Prix regarding the oil splash shield? Posted by Customer
    A:
    For 2002 models, remove the oil splash shield by bending the spring clips that secure it to the cylinder heads.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What should be examined on the valve seats for the 1995 Pontiac Grand Prix? Posted by Customer
    A:
    Examine the valve seats for pitting, cracking, or burning.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    How do you insert a valve for the 1994 Oldsmobile Cutlass? Posted by Customer
    A:
    Insert a valve into the appropriate port, and push a new seal fully over the valve stem, seating it in the cylinder head.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 10162077, the Right Choice

To ensure reliability, purchase GM part # 10162077 Cylinder Head Assembly (Machining). It is sometimes referred to as GM Cylinder Head. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Lumina, Monte Carlo models. It fits Oldsmobile Cutlass. It also fits Pontiac Grand Prix.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 10162077 Cylinder Head Assembly (Machining). You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly