Make sure this part fits

GM 24508387 Manifold Assembly, Lower Intake

1998-1999 GM

Customer Questions & Expert Answers (7)
GM 24508387 Manifold Assembly, Lower Intake
  • Part Description
    MANIFOLD, Engine Fuel Intake Manifold
  • Position
    Lower
  • Replaces
    24506263
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number24508387
    Part DescriptionMANIFOLD, Engine Fuel Intake Manifold
    Other NamesIntake Manifold
    Item Dimensions26.1 x 16.9 x 9.8 inches
    Item Weight14.30 Pounds
    PositionLower
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces24506263
    ManufacturerGeneral Motors
    SKU24508387
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1998-1999 Buick Century6 Cyl 3.1LCUSTOM, GS, LIMITED, LS
    1998-1999 Buick RegalCUSTOM, GS, LIMITED, LS
    1998-1999 Chevrolet Lumina6 Cyl 3.1LLS, LTZ, LUMINA, Z34
    1998-1999 Chevrolet Malibu6 Cyl 3.1L4 DOOR, LS 4 DOOR, LX 4 DOOR
    1998-1999 Chevrolet Monte Carlo6 Cyl 3.1LLS, LTZ, LUMINA, Z34
    1998 Oldsmobile Achieva6 Cyl 3.1LSEDAN LEVEL I, SEDAN LEVEL II
    1998-1999 Oldsmobile Cutlass6 Cyl 3.1LSEDAN LEVEL I, SEDAN LEVEL II
    1998-1999 Pontiac Grand Prix6 Cyl 3.1LGT 2 DOOR, GT 4 DOOR, GTP 2 DOOR, GTP 4 DOOR, SE 4 DOOR
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 24508387 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How should the seals be installed for the 1998 Oldsmobile Cutlass? Posted by Customer
    A:
    Install new front and rear seals to the engine block using RTV or an equivalent sealant, extending the bead about One-half inch up the sides of each cylinder head to seal the side gaskets.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What sealants should be applied before installing the manifold for the 1999 Oldsmobile Cutlass? Posted by Customer
    A:
    Apply ATV or equivalent sealant to the ends of the seals and Copper-coat gasket sealant to the intake manifold gasket.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done if the manifold is stuck to the cylinder head for the 1999 Pontiac Grand Prix? Posted by Customer
    A:
    If the manifold is stuck, gently dislodge it with a soft-face hammer, avoiding prying between the head and manifold to prevent damage to the gasket sealing surfaces.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done regarding the heater hose for the 1998 Pontiac Grand Prix? Posted by Customer
    A:
    Remove the heater hose, then pry the engine forward for additional intake manifold clearance.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done after installation for the 1998 Pontiac Grand Prix? Posted by Customer
    A:
    Finally, add coolant, run the engine, and check for leaks and proper operation.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    How should the bolt holes be prepared before installing the new manifold for the 1998 Pontiac Grand Prix? Posted by Customer
    A:
    Remove any debris from the bolt holes using a tap and compressed air if available, then install the intake manifold gasket.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Intake Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 24508387, the Right Choice

To ensure reliability, purchase GM part # 24508387 Manifold Assembly, Lower Intake. It is sometimes referred to as GM Intake Manifold. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Buick Century, Regal models. It fits Chevrolet Lumina, Malibu, Monte Carlo. It also fits Oldsmobile Achieva, Cutlass. This also fits Pontiac Grand Prix.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 24508387 Manifold Assembly, Lower Intake. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly