Make sure this part fits your vehicle

GM 25041498 Valve,Crankcase Vent

1982-1986 GM

GM 25041498 Valve,Crankcase Vent
  • Part Description
    VALVE, Engine Crankcase
  • Manufacturer
    General Motors
Customer Questions & Answers
$12.60
1
ADD TO CART
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25041498
    Part DescriptionVALVE, Engine Crankcase
    Other NamesPCV Valve
    Item Dimensions13.1 x 3.0 x 1.4 inches
    Item Weight1.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU25041498
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1982-1984 Buick Century4 Cyl 2.5LCUSTOM 2 DOOR, CUSTOM 4 DOOR, CUSTOM STATION WAGON, LIMITED 2 DOOR, LIMITED 4 DOOR
    1982-1984 Buick Skylark4 Cyl 2.5L2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR
    1982-1986 Chevrolet Camaro4 Cyl 2.5L2 DOOR, 4 DOOR
    1982-1984 Chevrolet Celebrity4 Cyl 2.5L2 DOOR, 4 DOOR, STATION WAGON
    1982-1984 Chevrolet Citation4 Cyl 2.5L2 DOOR, 2 DOOR NOTCHBACK, 2 DOOR PLAINBACK HATCHBACK, 4 DOOR
    1982-1984 Oldsmobile Cutlass4 Cyl 2.5L2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR, LS 2 DOOR, LS 4 DOOR, LS STATION WAGON
    1982-1984 Oldsmobile Omega4 Cyl 2.5L2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR
    1982-1984 Pontiac 60004 Cyl 2.5L2 DOOR, 4 DOOR, LE 2 DOOR, LE 4 DOOR, LE STATION WAGON, STATION WAGON, STE 2 DOOR, STE 4 DOOR
    1984-1986 Pontiac Fiero4 Cyl 2.5L2 DOOR, GT 2 DOOR, SE 2 DOOR, SPORT 2 DOOR
    1982-1986 Pontiac Firebird4 Cyl 2.5L2 DOOR
    View More

Customer Questions & Answers

Q:
I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
A:
You can Select Your Vehicle to check if 25041498 fits your vehicle.
Posted by GMPartsGiant Specialist
Q:
How do you remove and install the PCV valve for the 1976 Buick Century? Posted by Customer
A:
To remove and install the PCV valve, pull the valve and hose straight out of the valve cover or manifold. Use pliers to slide the hose clamp, if equipped, down the hose and off the valve connector. Twist the valve gently to loosen it from the hose and remove it. Inspect the hose and valve cover grommet, and replace them if they are hard, brittle, or cracked. Clean the hose with solvent if it is clogged. Install the valve into the hose, ensuring it seats fully. Attach the hose clamp, if equipped, around the valve assembly. Finally, install the PCV valve in the grommet, making sure it seats fully in the cover grommet.
Posted by GMPartsGiant Specialist
See expert answers on similar PCV Valve
Q:
What is connected to the PCV valve for the 1981 Buick Skylark? Posted by Customer
A:
A hose is connected to the PCV valve.
Posted by GMPartsGiant Specialist
See expert answers on similar PCV Valve
Q:
What should you do if there is little or no vacuum felt when running the engine at idle speed with the PCV valve removed for the 1982 Buick Skylark? Posted by Customer
A:
If there is little or no vacuum felt, it may indicate a blocked vacuum hose or inlet fitting at the engine, requiring further inspection and cleaning.
Posted by GMPartsGiant Specialist
See expert answers on similar PCV Valve
Q:
How to replace a PCV valve for Pontiac Firebird? Posted by Customer
A:
The PCV valve is located in either the rocker arm cover or intake manifold, with a hose connected to the valve running to either the carburetor or intake manifold. When purchasing a replacement PCV valve, it's important to ensure that it is compatible with your specific vehicle, model year, and engine size. To replace it, pull the valve (with the hose attached) from the rubber grommet in the rocker arm cover or manifold. Then, loosen the retaining clamp and remove the PCV valve from the end of the hose, taking note of its installed position and direction. Compare the old valve with the new one to ensure that they are the same. Push the new valve into the end of the hose until it is properly seated, and then reinstall the clamp. Inspect the rubber grommet for any damage and replace it with a new one if necessary. Finally, securely push the PCV valve and hose into position.
Posted by GMPartsGiant Specialist
Q:
How can you check if the PCV valve is functioning properly for the 1984 Oldsmobile Omega? Posted by Customer
A:
The PCV valve can be checked by shaking it and listening for a clicking sound, which indicates that the valve's check needle is functioning properly.
Posted by GMPartsGiant Specialist
See expert answers on similar PCV Valve
Q:
What should you consider when purchasing a replacement PCV valve for the 1980 Pontiac Phoenix? Posted by Customer
A:
It is important to ensure that the replacement PCV valve is suitable for your specific vehicle, model year, and engine size.
Posted by GMPartsGiant Specialist
See expert answers on similar PCV Valve
Q:
What are the symptoms of reduced or stopped flow in the PCV system for the 1980 Pontiac Phoenix? Posted by Customer
A:
Symptoms of reduced or stopped flow in the PCV system include rough idling or a reduced engine speed at idle.
Posted by GMPartsGiant Specialist
See expert answers on similar PCV Valve
Q:
Where is the PCV valve typically located for the 1987 Oldsmobile Cutlass? Posted by Customer
A:
The PCV valve is typically located in one of the rocker arm covers on the side of the engine.
Posted by GMPartsGiant Specialist
See expert answers on similar PCV Valve
Q:
What should you check before installing the new PCV valve for the 1983 Oldsmobile Omega? Posted by Customer
A:
Before installing the new PCV valve, you should check the rubber grommet in the cover for any damage.
Posted by GMPartsGiant Specialist
See expert answers on similar PCV Valve
Q:
What should you inspect at the rocker arm cover on the 1986 Pontiac Fiero? Posted by Customer
A:
Inspect the rubber grommet at the rocker arm cover for damage and replace it with a new one if needed.
Posted by GMPartsGiant Specialist
See expert answers on similar PCV Valve
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 25041498, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 25041498 Valve,Crankcase Vent. It is sometimes referred to as GM PCV Valve. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Buick Century, Skylark models. It fits Chevrolet Camaro, Celebrity, Citation. It also fits Oldsmobile Cutlass, Omega. This also fits Pontiac 6000, Fiero, Firebird.

Affordable, reliable and built to last, GM part # 25041498 Valve,Crankcase Vent stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly