Make sure this part fits

GM 10208894 Piston Assembly, W/Pinion(1.0 Mm Oversize)

1993-1995 GM

Customer Questions & Expert Answers (7)
GM 10208894 Piston Assembly, W/Pinion(1.0 Mm Oversize)
  • Part Description
    PISTON, Engine Piston
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number10208894
    Part DescriptionPISTON, Engine Piston
    Item Dimensions4.6 x 4.6 x 4.3 inches
    Item Weight1.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity6
    ManufacturerGeneral Motors
    SKU10208894
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1994-1995 Buick Century6 Cyl 3.1LCUSTOM, CUSTOM STATION WAGON, SPECIAL, SPECIAL 4 DOOR, SPECIAL STATION WAGON
    1994-1995 Buick Regal6 Cyl 3.1L2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, GRAN SPORT 4 DOOR, LIMITED 4 DOOR
    1994 Chevrolet Beretta6 Cyl 3.1L2 DOOR, 4 DOOR, Z26 2 DOOR
    1994 Chevrolet Corsica6 Cyl 3.1L2 DOOR, 4 DOOR, Z26 2 DOOR
    1995 Chevrolet Lumina6 Cyl 3.1LLS, LS 4 DOOR, LUMINA, MONTE CARLO
    1995 Chevrolet Monte Carlo6 Cyl 3.1LLS, LS 4 DOOR, LUMINA, MONTE CARLO
    1993-1995 Oldsmobile Cutlass6 Cyl 3.1L2 DOOR, 4 DOOR, INTERNAL 2 DOOR, INTERNAL 4 DOOR, S 4 DOOR, S STATION WAGON, SL 4 DOOR, SL STATION WAGON
    1994-1995 Pontiac Grand Prix6 Cyl 3.1L2 DOOR, 4 DOOR, GT 2 DOOR, SE 2 DOOR, SE 4 DOOR
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 10208894 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What should be ensured before beginning the installation of piston/connecting rod assemblies for the 1994 Chevrolet Beretta? Posted by Customer
    A:
    Before installation, ensure that the cylinder walls are meticulously clean, the top edges of each cylinder are chamfered, and the crankshaft is in place.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    What should be done before inspecting the piston/connecting rod assemblies, and why is this important for the 1994 Chevrolet Beretta? Posted by Customer
    A:
    Before inspecting the piston/connecting rod assemblies, you should clean them, and it's important to remove the original piston rings. This is crucial because new rings should always be used when reassembling the engine.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    What should be repeated for the remaining pistons and connecting rods for the 1994 Pontiac Grand Prix? Posted by Customer
    A:
    Repeat the process for the remaining pistons and connecting rods, ensuring cleanliness and proper orientation of the piston marks.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    Why is it important to have the pistons available if the cylinder block requires machine work for the 1994 Oldsmobile Cutlass? Posted by Customer
    A:
    If the cylinder block requires any machine work, including finish honing, the machinist will want the pistons available to check piston-to-bore clearance as the cylinder walls are cut. This measurement is critical and is best left to the machine shop.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    How can you protect the crankshaft journal and cylinder wall during piston removal for the 1994 Pontiac Grand Prix? Posted by Customer
    A:
    Slip a short length of plastic or rubber hose over each connecting rod cap bolt.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    What should be done after removing the ridge from a cylinder for the 1993 Oldsmobile Cutlass? Posted by Customer
    A:
    After removing the ridge, crank the engine until the piston is at the top of the cylinder, then remove the cloth and cuttings to avoid damaging the piston rings, pistons, or cylinder walls.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 10208894, the Right Choice

To ensure reliability, purchase GM part # 10208894 Piston Assembly, W/Pinion(1.0 Mm Oversize). It is sometimes referred to as GM Piston. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Buick Century, Regal models. It fits Chevrolet Corsica, Lumina, Monte Carlo. It also fits Oldsmobile Cutlass. This also fits Pontiac Grand Prix.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 10208894 Piston Assembly, W/Pinion(1.0 Mm Oversize). You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly