Make sure this part fits

Oldsmobile 22527438 Crankshaft (Machine)

1982-1990 Oldsmobile

Customer Questions & Expert Answers (9)
GM 22527438 Crankshaft (Machine)
  • Part Description
    Crankshaft (Machine) *Machine*
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Oldsmobile
    Manufacturer Part Number22527438
    Part DescriptionCrankshaft (Machine) *Machine*
    Other NamesCrankshaft
    Item Dimensions29.0 x 9.3 x 8.8 inches
    Item Weight56.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU22527438
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1982-1990 Oldsmobile Custom Cruiser8 Cyl 5.0L2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR, BROUGHAM LS 4 DOOR, RWD, STATION WAGON
    1982-1987 Oldsmobile Cutlass8 Cyl 4.3L, 8 Cyl 5.0L2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR, CUTLASS CALAIS, CUTLASS CRUISER
    1982-1985 Oldsmobile Delta 888 Cyl 4.3L, 8 Cyl 5.0L2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR, BROUGHAM LS 4 DOOR, RWD, STATION WAGON
    1982-1985 Oldsmobile Toronado8 Cyl 5.0LBROUGHAM
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 22527438 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How to remove and install the Crankshaft on Buick Regal? Posted by Customer
    A:
    To remove the engine, first drain the oil and remove it from the car. You should mount the engine on a work stand with the oil pan facing up. The next steps involve removing the front cover, timing chain and gears, oil pan, and oil pump. For identification purposes, stamp the cylinder number on connecting rod bolt bosses and caps. You have to protect crank journals by installing rubber hose over there before removing connecting rod caps. Finally, mark all main bearing caps to remember how they were on installation. Slowly lift out the crankshaft after removing all main bearing caps. If necessary, replace both upper and lower halves of these crankshaft main bearings that should be cleaned carefully at first. Examine clearance by using Plastigage® along with replacing bearings if required. Before installing them in place, install crankshaft together with bearings while cap bolts must be torqued per specifications. At last, measure end play of this shaft then fix a rear main bearing seal on its place.
    Posted by GMPartsGiant Specialist
    Q:
    How should excessive running clearance be checked for the 1986 Chevrolet Caprice? Posted by Customer
    A:
    Excessive running clearance should be checked using a product like 'Plastigage' after refitting the original bearings and caps and tightening the cap bolts to the specified torque settings.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft
    Q:
    How should the main bearing caps be marked for the 1986 Chevrolet Caprice? Posted by Customer
    A:
    Each of the five main bearing caps should be marked for their specific location in the engine block. If they are not marked, small indentations should be made similarly to the connecting rods and caps to ensure proper reinstallation.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft
    Q:
    What is the final step in the crankshaft installation process for the 1986 Chevrolet Caprice? Posted by Customer
    A:
    Install the flywheel to facilitate engine rotation during reassembly.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft
    Q:
    What should a home mechanic do before deciding on the best rebuilding method for the 1986 Chevrolet El Camino? Posted by Customer
    A:
    It is advised to carefully consider the best method for their situation and to discuss options with local machine shop owners, parts dealers, or GM dealership parts personnel.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft
    Q:
    How is the crankshaft gear at the front removed for the 1986 Chevrolet El Camino? Posted by Customer
    A:
    The crankshaft gear at the front can be removed using a special puller designed for this task.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft
    Q:
    What should be done after removing the main bearing caps for the 1982 Oldsmobile Cutlass? Posted by Customer
    A:
    Next, lift the crankshaft from the engine block, taking care not to damage it.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft
    Q:
    How can excessive running clearance be checked for the 1982 Oldsmobile Cutlass? Posted by Customer
    A:
    Excessive running clearance can be checked using a product like 'Plastigage' after refitting the original bearings and caps and tightening the cap bolts to the specified torque settings.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Crankshaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 22527438, the Right Choice

To ensure reliability, purchase GM part # 22527438 Crankshaft (Machine). It is sometimes referred to as Oldsmobile Crankshaft. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Oldsmobile Custom Cruiser, Cutlass, Delta 88 models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 22527438 Crankshaft (Machine). You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Oldsmobile parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly