Make sure this part fits

GM 10185132 Bracket, Engine Rear Mount Engine Side

1991-1992 GM

Customer Questions & Expert Answers (5)
GM 10185132 Bracket, Engine Rear Mount Engine Side
  • Part Description
    BRACKET, Engine Mounting
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number10185132
    Part DescriptionBRACKET, Engine Mounting
    Other NamesMount Bracket, Side Bracket
    Item Weight1.70 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU10185132
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1991-1992 Chevrolet Lumina6 Cyl 3.4L2 DOOR, 4 DOOR
    1991-1992 Oldsmobile Cutlass6 Cyl 3.4L2 DOOR, 4 DOOR, INTERNAL 2 DOOR, INTERNAL 4 DOOR
    1991-1992 Pontiac Grand Prix6 Cyl 3.4L2 DOOR, 4 DOOR, GT 2 DOOR, LE 2 DOOR, LE 4 DOOR, SE 2 DOOR, SE 4 DOOR, STE 4 DOOR
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 10185132 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you replace the rear mount for the 1992 Oldsmobile Cutlass? Posted by Customer
    A:
    For the rear mount replacement, raise the engine to relieve weight. Remove the bolts attaching the crossmember to the mount, and then take out the mount-to-transmission bolts before removing the engine mount. Finally, install the new mount on the transmission, aligning and starting the crossmember-to-mount bolts while lowering the transmission onto the mount, and torque-tighten the bolts.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What are the steps for replacing the lower engine mount for the 1992 Pontiac Grand Prix? Posted by Customer
    A:
    Detach the negative battery cable again, remove the nuts from the engine mount while working under the frame mounting bracket, raise the engine off the mount, and remove the mount-to-bracket nuts to take the mount out of the vehicle. Installation follows the reverse order of removal, gently lowering the engine and tightening the nuts securely before reconnecting the negative battery cable.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How do you replace the front mounts for the 1991 Oldsmobile Cutlass? Posted by Customer
    A:
    Start by removing the through-bolt and nut. Then, raise the engine slightly using a hoist or jack with a wood block under the oil pan, and remove the mount and bracket assembly from the frame. Install the new mount along with the through-bolt and nut, ensuring all bolts are tightened to the specified torque.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What makes the right rear engine mount replacement more complex for the 1992 Pontiac Grand Prix? Posted by Customer
    A:
    The right rear engine mount replacement is more complex because it requires the removal of the hood and the use of a three-bar engine support from above, along with raising and supporting the front of the vehicle on jack stands. Additionally, the engine cooling fan must be removed, the engine torque strut disconnected, the right drive axle removed, and the right ball joint disconnected at the control arm.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Engine Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 10185132, the Right Choice

To ensure reliability, purchase GM part # 10185132 Bracket, Engine Rear Mount Engine Side. It is sometimes referred to as GM Engine Mount, GM Engine Mount Bracket. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Lumina models. It fits Oldsmobile Cutlass. It also fits Pontiac Grand Prix.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 10185132 Bracket, Engine Rear Mount Engine Side. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly