Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

GM 10154745 Cylinder Head

1993-1996 GM

Customer Questions & Expert Answers (24)
GM 10154745 Cylinder Head
GM 10154745 Cylinder Head
  • Part Description
    Head,Cyl
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • Related Parts

    Shop for related parts for your vehicle

  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number10154745
    Part DescriptionHead,Cyl
    Item Dimensions9.0 x 8.9 x 17.0 inches
    Item Weight14.90 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerGeneral Motors
    SKU10154745
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1994-1996 Buick Century6 Cyl 3.1LCUSTOM, CUSTOM STATION WAGON, SPECIAL, SPECIAL 4 DOOR, SPECIAL STATION WAGON
    1994-1995 Buick Regal6 Cyl 3.1L2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, GRAN SPORT 4 DOOR, LIMITED 4 DOOR
    1994-1996 Buick Skylark6 Cyl 3.1L2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, GRAN SPORT 4 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR
    1994-1996 Chevrolet Beretta6 Cyl 3.1L2 DOOR, 4 DOOR, Z26 2 DOOR
    1994-1996 Chevrolet Corsica6 Cyl 3.1L2 DOOR, 4 DOOR, Z26 2 DOOR
    1995 Chevrolet Lumina6 Cyl 3.1LLS, LS 4 DOOR, LUMINA, MONTE CARLO
    1995 Chevrolet Monte Carlo6 Cyl 3.1LLS, LS 4 DOOR, LUMINA, MONTE CARLO
    1994-1996 Oldsmobile Achieva6 Cyl 3.1L2 DOOR, 4 DOOR, S 2 DOOR, S 4 DOOR, SC 2 DOOR, SL 4 DOOR
    1993-1996 Oldsmobile Cutlass6 Cyl 3.1L2 DOOR, 4 DOOR, INTERNAL 2 DOOR, INTERNAL 4 DOOR, S 4 DOOR, S STATION WAGON, SL 4 DOOR, SL STATION WAGON
    1994-1996 Pontiac Grand Am6 Cyl 3.1LGT 2 DOOR, GT 4 DOOR, SE 2 DOOR, SE 4 DOOR
    View More

  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 10154745 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What is the procedure for installing the cylinder head for the 1995 Pontiac Grand Prix? Posted by Customer
    A:
    Carefully place the head on the block without disturbing the gasket, install the bolts, and tighten them in the specified sequence to the required torque. Then, turn each bolt the specified angle using the same sequence.
    Posted by GMPartsGiant Specialist
    Q:
    Why is it important to ensure the cylinder head is clean before beginning reassembly for the 1989 Chevrolet Beretta? Posted by Customer
    A:
    It's important to ensure the cylinder head is clean before beginning reassembly to prevent any contaminants from interfering with the reassembly process and to maintain the engine's performance and reliability.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What is important to ensure before installing the new head gasket and head for the 1989 Chevrolet Beretta? Posted by Customer
    A:
    Ensure the cylinder head and block mating surfaces are impeccably clean for installation, using a gasket scraper and cleaning with lacquer thinner or acetone to prevent oil on the surfaces.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What should you do after removing the cylinder head for the 1987 Chevrolet Beretta? Posted by Customer
    A:
    1. Using a new head gasket, outline cylinders and bolt pattern on cardboard.2. Loosen each cylinder head mounting bolt 1/4-turn at a time and store them in the cardboard holder.3. Lift the head off the engine with care, tap if stuck, and place it on a block of wood.4. Remove the cylinder head gasket.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    How should the cylinder head be lifted off the engine for the 1992 Chevrolet Beretta? Posted by Customer
    A:
    The cylinder head(s) should be lifted off the engine carefully, ensuring not to damage the mating surfaces.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What is the first step in cylinder head disassembly, and what must be removed before starting this procedure for the 1992 Chevrolet Beretta? Posted by Customer
    A:
    The first step in cylinder head disassembly is the removal of the intake and exhaust valves and related components. For a Quad-4 engine, the camshafts and housings must be removed before beginning the cylinder head disassembly procedure.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What should be checked in the valve springs for the 1994 Chevrolet Beretta? Posted by Customer
    A:
    The valve springs should be checked for wear and their free length should be measured.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What should be done regarding the valve stem for the 1987 Oldsmobile Cutlass? Posted by Customer
    A:
    Install a new oil seal in the lower groove of the valve stem, ensuring it is flat and not twisted.
    Posted by GMPartsGiant Specialist
    Q:
    What is the next step after removing the spring components for the 1989 Oldsmobile Cutlass? Posted by Customer
    A:
    Next, remove the oil seals from the stem of each valve, ensuring new seals are used upon reassembly, and take out any spring shims located at the bottom of the valve spring.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done after completing the engine assembly for the 1982 Oldsmobile Cutlass? Posted by Customer
    A:
    Fill the radiator with coolant, start the engine, check for leaks, and adjust the ignition timing and valves as necessary, rechecking the coolant level once the engine reaches operating temperature.
    Posted by GMPartsGiant Specialist
    Q:
    What should be used to clean the rocker arm assemblies, push rods, and valve components for the 1987 Oldsmobile Cutlass? Posted by Customer
    A:
    Use parts cleaner to remove all sludge and dirt from the rocker arm assemblies, push rods, and valve components, working on one set at a time and returning each to its numbered location on your box or rack.
    Posted by GMPartsGiant Specialist
    Q:
    What is the first step to take when working on the 1995 Oldsmobile Cutlass equipped with AIR? Posted by Customer
    A:
    Disconnect the rubber hose at the injection tubing check valve to avoid removing the tubing from the exhaust manifold.
    Posted by GMPartsGiant Specialist
    Q:
    How should the head bolts be tightened for the 1998 Oldsmobile Cutlass? Posted by Customer
    A:
    Ensure the torque wrench is accurate to prevent uneven tightening that can distort the cylinder bores, leading to compression loss and excessive oil consumption. Install the head bolts and tighten them gradually about three times around in the specified sequence, followed by a final torque in the same order, adhering to torque specifications.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done to the mating surfaces of the cylinder head and block before installation for the 1990 Pontiac Grand Prix? Posted by Customer
    A:
    The mating surfaces should be cleaned using a gasket scraper and cleaned with lacquer thinner or acetone, taking care not to damage the aluminum surface.
    Posted by GMPartsGiant Specialist
    Q:
    How should the A/C compressor be handled during the process for the 1993 Oldsmobile Cutlass? Posted by Customer
    A:
    If the vehicle has air conditioning, the A/C compressor and forward mounting bracket should be removed, ensuring all hoses and fittings are plugged to prevent dirt from entering the system.
    Posted by GMPartsGiant Specialist
    Q:
    What should be noted about resurfacing the cylinder head for the 1984 Oldsmobile Cutlass? Posted by Customer
    A:
    Note that resurfacing the cylinder head will slightly alter the intake manifold position, requiring proportional resurfacing of the manifold.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    How should rocker arms, pivot balls, nuts, and pushrods be cleaned for the 1992 Pontiac Grand Prix? Posted by Customer
    A:
    Clean the rocker arms, pivot balls, nuts, and pushrods with solvent, ensuring they are dried thoroughly without mixing them up.
    Posted by GMPartsGiant Specialist
    Q:
    How should the head bolts and threaded holes be prepared for the 1993 Pontiac Grand Prix? Posted by Customer
    A:
    Ensure the threads of the head bolts and the threaded holes in the engine block are clean, using a die and tap as needed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What must be removed before starting disassembly for a Quad-4 engine or a 3.4L V6 for the 1990 Pontiac Grand Prix? Posted by Customer
    A:
    The camshafts and housings must be removed.
    Posted by GMPartsGiant Specialist
    Q:
    How should the block and head mating surfaces be checked for the 1991 Pontiac Grand Prix? Posted by Customer
    A:
    Check for nicks, deep scratches, and other damage, using a file for slight damage or considering machining for excessive damage.
    Posted by GMPartsGiant Specialist
    Q:
    What is the correct way to place the gasket for the 1991 Pontiac Grand Prix? Posted by Customer
    A:
    Place the gasket over the engine block dowel pins, noting any orientation marks, and carefully lower the cylinder head onto the engine.
    Posted by GMPartsGiant Specialist
    Q:
    How should the valve springs be installed for the 1995 Pontiac Grand Prix? Posted by Customer
    A:
    Position the valve springs (and shims, if used) over the valves, compress the springs with a valve spring compressor, and carefully install the keepers in the groove. Then slowly release the compressor to ensure the keepers seat properly; a small dab of grease can be applied to each keeper to hold it in place if necessary.
    Posted by GMPartsGiant Specialist
    Q:
    What is the first step to remove the cylinder head for the 1992 Pontiac Grand Prix? Posted by Customer
    A:
    The first step is to disconnect the negative battery cable, ensuring the Theftlock audio system's lockout feature is off.
    Posted by GMPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 10154745, the Right Choice

To ensure reliability, purchase GM part # 10154745 Cylinder Head. It is sometimes referred to as GM Cylinder Head. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Buick Century, Regal, Skylark models. It fits Chevrolet Corsica, Lumina, Monte Carlo. It also fits Oldsmobile Achieva, Cutlass. This also fits Pontiac Grand Am, Grand Prix.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 10154745 Cylinder Head. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly