Make sure this part fits

GM 24504390 Bracket Assembly, Engine Mount Strut

1996-2005 GM

Customer Questions & Expert Answers (8)
GM 24504390 Bracket Assembly, Engine Mount Strut
  • Part Description
    BRACKET, A/C Compressor Mounting
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number24504390
    Part DescriptionBRACKET, A/C Compressor Mounting
    Item Dimensions4.4 x 4.3 x 12.6 inches
    Item Weight5.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU24504390
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1997-2005 Buick Century6 Cyl 3.1LCUSTOM, CUSTOM 4 DOOR, GL, GLX, GS, LIMITED, LS, REGAL
    1996-2004 Buick Regal6 Cyl 3.1L2 DOOR, 4 DOOR, CUSTOM, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GL, GLX, GRAN SPORT 4 DOOR, GS, LIMITED, LIMITED 4 DOOR, LS, REGAL
    2002-2005 Buick Rendezvous6 Cyl 3.4LAWD, RENDEZVOUS
    2000-2005 Chevrolet Impala6 Cyl 3.4LIMPALA, LS, LT, LUMINA, POLICE CAR, SS
    1996-2001 Chevrolet Lumina6 Cyl 3.1L, 6 Cyl 3.4LAPV, APV CARGO, LS, LS 4 DOOR, LTZ, LTZ 4 DOOR, LUMINA, MONTE CARLO, Z34
    1996-2005 Chevrolet Monte Carlo6 Cyl 3.1L, 6 Cyl 3.4LIMPALA, LS, LS 4 DOOR, LT, LTZ, LTZ 4 DOOR, LUMINA, MONTE CARLO, POLICE CAR, SS, Z34
    1997-2005 Chevrolet Venture6 Cyl 3.4L2/SLIDING DOORS, AWD EXTENDED, EXTENDED, EXTENDED 2/SLIDING DOORS, VENTURE
    1996-1997 Oldsmobile Cutlass6 Cyl 3.1L2 DOOR, 4 DOOR
    1996-2004 Oldsmobile Silhouette6 Cyl 3.4L2/SLIDING DOORS, AWD EXT 2/SLIDING DOORS, EXT, EXT 2/SLIDING DOORS, MPV, SILHOUETTE
    2001-2005 Pontiac Aztek6 Cyl 3.4LAZTEK, GT AWD
    View More
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 24504390 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What makes the right rear engine mount replacement more complex for the 1998 Pontiac Grand Prix? Posted by Customer
    A:
    The right rear engine mount replacement is more complex because it requires the removal of the hood and the use of a three-bar engine support from above, along with raising and supporting the front of the vehicle on jack stands. Additionally, the engine cooling fan must be removed, the engine torque strut disconnected, the right drive axle removed, and the right ball joint disconnected at the control arm.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done if the flexible mounts are found to be hard, split, or separated from their metal backing during inspection for the 1996 Oldsmobile Cutlass? Posted by Customer
    A:
    They need to be replaced, which can be done with the engine/transmission still in the vehicle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How do you replace the rear mount for the 1996 Oldsmobile Cutlass? Posted by Customer
    A:
    For the rear mount replacement, raise the engine to relieve weight. Remove the bolts attaching the crossmember to the mount, and then take out the mount-to-transmission bolts before removing the engine mount. Finally, install the new mount on the transmission, aligning and starting the crossmember-to-mount bolts while lowering the transmission onto the mount, and torque-tighten the bolts.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be inspected on the engine mounts for the 1999 Pontiac Grand Prix? Posted by Customer
    A:
    Check the mounts for cracked, hardened, or separated rubber, and look for any relative movement between the mount plates and the engine or frame, using a large screwdriver or pry bar to test for movement.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What are the steps for replacing engine mounts for the 1997 Pontiac Grand Prix? Posted by Customer
    A:
    For replacement, disconnect the negative battery cable and raise the vehicle on jackstands if not already done. Ensure that the Theftlock audio system's lockout feature is turned off before disconnecting the battery. Remove the engine torque strut, then raise the engine slightly with a jack or hoist, removing the fasteners to detach the mount from the frame. Next, remove the mount-to-block bracket bolts or nuts and detach the mount.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How do I install the new engine mounts for the 1998 Pontiac Grand Prix? Posted by Customer
    A:
    Installation follows the reverse order of removal, using thread locking compound on the threads and tightening everything securely.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How can I help slow the deterioration of engine mounts for the 1997 Pontiac Grand Prix? Posted by Customer
    A:
    Applying rubber preservative can help slow deterioration.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Engine Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 24504390, the Right Choice

To ensure reliability, purchase GM part # 24504390 Bracket Assembly, Engine Mount Strut. It is sometimes referred to as GM Engine Mount, GM Engine Torque Strut Mount. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Buick Century, Regal, Rendezvous models. It fits Chevrolet Impala, Monte Carlo, Venture. It also fits Oldsmobile Cutlass, Silhouette. This also fits Pontiac Aztek, Grand Prix, Montana.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 24504390 Bracket Assembly, Engine Mount Strut. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly